Skype Digital Enhanced Cordless Communication User Manual

• User Manual • Digital Enhanced Cordless Communication SKYPE™ DECT TELEPHONE

9 3. Press Left key to confirm, and Right key to clear the old name, then key in the new name; 4. Press Left key to save the edit, also goes to the

10 3. Choose the picture you prefer, and then press Left key to confirm, now the picture is set to the wallpaper of the handset. To Set External/In

11 Press Left key and “ “ button consecutively to lock/unlock the keypad. To Enter Base Settings Mode 1. Select Settings under menu mode; 2. Pre

12 2. Then press Left key, the display shows the call barring number you set; 3. Press and hold Right key to clear the number; 4. Press L

13 6. After a while, when the handset finds the base unit, it goes back to the standby mode. To de-register a handset You may need to do this if yo

14 To Call a Skype™ User Make sure the Skype™ user is available in your Skype net Contact list and is online. Otherwise, add the online Skype™ user

15 2. Select < User Status > under Skype mode; 3. Press Left key, then the display shows the selection status; 4. Press Scrolling button to

16 On the other handset's display, your number appears, and the INT symbol flashes. Then the other handset user presses the Call key to connect

17 The phone does not ring Check that the base unit’s mains power adapter is plugged in and power is switched on. The base unit needs mains power for

18 Electrical power Handset- One 1.2 x 2 V 750 mAH Ni-MH, Rechargeable battery cell Base unit Input 230 V AC, 50 Hz; Output

1 Contents Introduction ...1 Physical Details...

2 Minimum System Requirements  Broadband Internet Service  PC with the following minimum specifications: Pentium 400Mhz or above Windows® 2000®

3 End /On-Off Key Press to end a telephone call. Press and hold 2-3 seconds to switch the handset on/off. Pause Key Long press for pause, short pre

4 What the symbols mean Batteries Charge Level Whenever this shows ‘nearly empty’ (), put the handset on the base unit to charge the batt

5 Installation 1. Choose a suitable site for the base unit Make sure it is not near to another telephone, nor to other electrical equipment.

6 9. Mount the CD-ROM and install the program with CD installation provided. The installation should run automatically. If it doesn’t, begin the inst

7 Making and Answering Calls To Make an Ordinary Call 1. Enter the telephone number and press Call key to place call; 2. If you make a mi

8 To Toggle between Skype call and PSTN call 1. When you already engaged on an ongoing call, if another Skype call is received, press Right key to e